In a mechanic's workshop, the challenge of lifting vehicles with high roofs is compounded by the need for ample space to maneuver. Traditional lifts often require permanent installation, which isn't feasible in all settings, especially when dealing with tall vehicles that demand more vertical clearance.
Conventional top beams collide with van and RV roofs at full height.
Techs burn 2–3 minutes a lift positioning a manual brace — 40–60 minutes a day, gone.
Anchoring means drilling a slab you rent — or legally can't touch.
Electric "portable" lifts wear out under daily cyclic loads.
You need shop-grade hydraulic lifting that travels—and protects the vehicle on the way up.
The top beam rises and lowers in perfect sync with the arms — no roof contact on vans, RVs, or lifted trucks, ever.
Fewer moving parts, no battery to degrade — proven industrial hydraulics built for 20+ years of daily use.
The brace engages automatically — zero operator input — turning non-revenue lift time back into billable work.
Tell us your vehicles, bays, and floor. You get matched to the right SKU — no guesswork.
Welded, tested to 2× rated capacity, and freight-prepped for delivery.
It arrives ready—set up in 5–15 minutes, no installer, no inspector.
Every line below is a high-roof job you used to send down the road — now it's billable work on your floor.
Work upright to 73½ inches—no crawling, no jack stands.
Recover 167–250 billable hours a year vs manual bracing.
Skip concrete, electrician, and permits — $0 floor prep.
Run under 120 PSI — safe on residential, epoxy, aged, or commercial floors.
Keep 60–80% resale value—it's yours, not the building's.
The top beam rises in perfect sync with the lifting arms—even at full extension, it never touches the roof. Lift vans, RVs, commercial trucks, and lifted pickups with no clearance risk. Dual automatic locking (mechanical + hydraulic) holds the vehicle at height even if power fails. Under 120 PSI ground pressure—less than a parked car.
Dual Automatic Locking Systems – Mechanical + Hydraulic Your vehicle stays locked—even if power fails. The Model features dual automatic locking systems (mechanical + hydraulic). If the power supply is interrupted during the lifting process, your vehicle remains securely locked at the height reached. No dropping. No drifting. No hydraulic pressure required to hold position
✅ Fail-safe by design. Two independent systems work together to protect you, your vehicle, and your shop.
Wide base plates distribute the load uniformly at less than 120 PSI of ground pressure. For comparison, your typical garage floor supports 150 PSI from parked vehicles. That means the Model puts less stress on your floor than a parked car. Safe for:
🔹Residential garages
🔹Epoxy-coated floors
🔹Aged or cracked concrete
🔹Commercial shop floors
✅ No floor damage. No extra reinforcement needed.
In the fast-paced world of vehicle maintenance, having tools that keep up with your demands is crucial. While fixed lifts can handle the job, they often dominate your workspace and limit flexibility. The Model PCH-C8 changes this by being portable and stowable, allowing you to adapt your shop or garage layout as needed. It's more than just a lift—it's a smarter, more efficient way to operate.
Understanding the space requirements for a 2 Post car lift is crucial to ensuring smooth installation and car hoist operation. Whether you’re setting up a small garage or expanding a large commercial operation, our portable car hoists lift using electric power of 110v and 220v and for flexibility and mobility, we can use 12V or 24V based on the portable car hoist capacity tailored to different needs. please contact us for any questions
Base Power Options
Electric (standard outlet for stationary use) OR Battery-Powered (for mobile operations)
Electric Voltage base on model capacity
110V-220V
Battery-Powered base on model capacity
12 V - 24 V
Motor
115-230V, 50-60Hz, 1-HP.
Battery Runtime
8-12 full lift cycles
Recharge Time
4-6 hours (110V)
Motor RPM
3450
In the fast-paced world of vehicle maintenance, having adaptable tools is essential. While traditional lifts can handle the job, they often take up valuable space and limit your flexibility. Our portable car hoist offers a solution, allowing you to reconfigure your workspace as needed. It's not just a lift—it's a smarter, more efficient way to work.
Once you add anchoring, installation, electrical, and permits, the "cheaper" lifts land in the same range—without the auto top brace, the height, or the portability.
